DIN2391-1/EN 10305-1 BK NBK GBK din2391 Präzision nahtlose Stahlrohr
Produktbeschreibung
din2391 ausführliche Beschreibung Stahlrohr
Kohlenstoffstahl Präzisionsrohre für strukturelle Zwecke Maschine. Standard: DIN2391-1: nahtlose Präzisions-Stahlrohre. EN 10305-1: Stahlrohre für Präzisionsanwendungen - Technische Lieferbedingungen-Teil 1: nahtlose kalt gezogenen Rohren. Größe (mm): Außenmaße: 4,0 mm ~ 100,0 mm Wandstärke: 2mm ~ 25 mm Länge: max 12000mm Anwendung: detaillierte Beschreibung
Kohlenstoffstahl Rohre für strukturelle Zwecke Maschine. Standard: DIN2391-1: nahtlose Präzisions-Stahlrohre. EN 10305-1: Stahlrohre für Präzisionsanwendungen - Technische Lieferbedingungen-Teil 1: nahtlose kalt gezogenen Rohren. Größe (mm): Außenmaße: 4,0 mm ~ 100,0 mm Wandstärke: 0,5 mm ~ 8 mm Länge: max. 6000mm Anwendung: Hydraulikzylinder, Baumaschinen, Pneumatikkomponenten, Automobil oder Motorradteile, Betonpumpe Röhren, motor Schale, Rohr-Kern für Aluminiumfolie und so weiter. Stahlgüte: DIN2391-1(ST35, ST45, ST52), EN10305-1(E215, E235, E355). Verpackung: Bare/Pakete/Kisten/Kiste Schutz an den beiden Seiten von Röhren oder nach Anforderungen der Kunden. Malerei: wunschgemäß Verpackung: Bare/Pakete/Kisten/Kiste Schutz an den beiden Seiten von Röhren oder nach Anforderungen der Kunden. Malerei: wunschgemäß
Name |
Din 2391 prcision carbon steel tube made in china |
Standard |
Din 2391 |
Material |
St35,St45,St52 |
Supply Condition |
Cold drawn seamless steel tube, stress relieved and honed or skived roller burnished |
Appearance |
Tube shall have a smooth internal and external surface consistent with cold working process, tube inner surface should be free from rust, scratches and other surface irregularities. |
Tolerance on Outer Dia. |
≤ Dia 40 +/-0.2 mm |
Surface Roughness |
Ra = 0.4~0.8 Micron |
Application |
Cold drawn or cold rolled precision seamless steel tubes for hydraulic pressure and pneumatic services.For Auto use,machinery use,oil cylinder tube,motorcycle shock reducer use,auto shock reducer inner cylinder,etc.Seamless steel pipes for low and medium pressure boiler, high pressure boiler, ship-building,Liquid service, petroleum cracking, chemical fertilizer equipment,Drawing-oil-equipment and structure purposes. |
material | Chemical Composition(%) | ||||
C max. | Si max. | Mn | P max. | S max. | |
St 35 | 0.17 | 0.35 | ³0.40 | 0.025 | 0.025 |
St 45 | 0.21 | 0.35 | ³0.40 | 0.025 | 0.025 |
St 52 | 0.22 | 0.55 | £1.60 | 0.025 | 0.025 |
material | Cold finished (hard)BK(+C) | Cold finished (Soft)BKW | Cold finished and stress-relieved BKS(+SR) | ||||
(+LC) | |||||||
Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Yield Point(Mpa) | Elongation(δ5/%) | |
St 35 | 480 | 6 | 420 | 10 | 420 | 315 | 14 |
St 45 | 580 | 5 | 520 | 8 | 520 | 375 | 12 |
St 52 | 640 | 4 | 580 |
material | Annealed GBK(+A) | Normalized NBK(+N) | |||
Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Yield Point(Mpa) | Elongation(δ5/%) | |
St 35 | 315 | 25 | 340-470 | 235 | 25 |
St 45 | 390 | 21 | 440-570 | 255 | 21 |
St 52 | 490 | 22 |
material | Annealed GBK(+A) | Normalized NBK(+N) | |||
Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Yield Point(Mpa) | Elongation(δ5/%) | |
St 35 | 315 | 25 | 340-470 | 235 | 25 |
St 45 | 390 | 21 | 440-570 | 255 | 21 |
St 52 | 490 | 22 |
Designation |
Symbol |
Description |
Cold finished (hard) |
BK(+C) |
Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation |
Cold finished (Soft) |
BKW |
The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding) |
Cold finished and stress-relieved |
BKS(+SR) |
Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. |
Annealed |
GBK(+A) |
The last Cold forming process is followed by annealing in a controlled atmosphere. |
Normalized |
NBK(+N) |
The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
SIZE | SIZE |
OD*thickness | OD*thickness |
25*2-3-4-5-6 | 54*5-6-8-10-12 |
27*2-3-4-5-6 | 55*5-6-8-10-12 |
28*2-3-4-5-6 | 57*5-6-8-10-12 |
30*3-4-5-6-8-10 | 60*5-6-8-10-12 |
32*3-4-5-6-8-10 | 63.5*5-6-8-10-12-14 |
34*3-4-5-6-8-10 | 65*5-6-8-10-12-14 |
36*3-4-5-6-8-10 | 68*5-6-8-10-12-14 |
37*3-4-5-6-8-10 | 70*5-6-8-10-12-14 |
38*3-4-5-6-8-10 | 73*5-6-8-10-12-14 |
40*3-4-5-6-8-10-12 | 76*5-6-8-10-12-14-16 |
42*3-4-5-6-8-10-12 | 78*5-6-8-10-12-14-16 |
45*3-4-5-6-8-10-12 | 80*5-6-8-10-12-14-16 |
46*3-4-5-6-8-10-12 | 83*5-6-8-10-12-14-16 |
48*3-4-5-6-8-10-12 | 89*8-10-12-14-16 |
50*3-4-5-6-8-10-12 | 95*8-10-12-14-16 |
51*5-6-8-10-12 | 98*8-10-12-14-16 |
53*5-6-8-10-12 | 100*8-10-12-14-16 |
Produktgruppe : Präzisionsstahlrohr
Premium Related Products